Introduction

This type of penetrant is soluble in water, the solution is milky white, it is not resistant to strong acid, strong alkali, heavy metal salts and reducing agents, it is penetrating, uniform, and has good wetting, penetration, emulsification and foaming properties. It penetrates below 40°C, and is easily hydrolyzed when encountering alkali at high temperature. It is suitable to treat the fabric with the penetrant below 40°C before heating.

This type of penetrant is used to treat cotton, linen, viscose and their blended products. The treated fabric is directly bleached or dyed without scouring, which can improve the dyeing defects caused by dead cotton. The fabric feels soft and full after printing and dyeing. When scouring and bleaching the raw dough, it is better to remove the slurry first to ensure the penetration effect.
It is used for dyeing raw cotton; for pesticide wettable powder; for finishing wood, it can accelerate the penetration of effective substances.
If too much foam is found during use, a small amount of defoaming agent can be added, such as octanol and tributyl phosphate.

Specification

Precautions:
1. Operators must wear protective clothing, rubber gloves, goggles and masks to avoid contact with skin, eyes and mucous membranes.
2. Once in contact with skin, immediately wash with plenty of water and soap. If accidentally splashed into eyes, immediately wash with plenty of water and buffer solution.

Package: 50kg/drum