Fluoride removal agent

Introduction

The defluoridation agent developed by our company is a composite product specially developed to solve the problem of fluoride removal in wastewater. It is suitable for the treatment of excessive wastewater in various industries. It has the characteristics of fast reaction speed, high removal efficiency, small addition amount, easy addition and use, and the removal rate can reach more than 97%.

Quality standard

Application

Fluoride removal products can be widely used to remove fluoride-containing wastewater generated by various industries. The defluorination process is simple and can be directly added to the physicochemical treatment coagulation section or the front end of the sedimentation tank to add the coagulant aid pool. It has a wide range of applicability and can be used under pH values ​​of 2-12, with the best defluorination pH value of 6-7. The treatment rate is high and the defluorination is deep, which can reduce the total fluoride in the wastewater to below 1mg/L.

Packaging and storage

1. A full range of defluoridation agents can treat various organic fluorines, inorganic fluorine, high-difficulty fluorine-containing wastewater, and high, medium and low concentration fluorine-containing wastewater and can treat the fluoride content of wastewater to below 1 mg/L.
2. Fast sedimentation rate, fast adsorption efficiency, and high removal rate. Under the same conditions, the defluoridation efficiency is 2-4 times that of activated alumina and 8-10 times that of zeolite molecular sieve, which can greatly reduce the treatment cost.
3. The whole process does not require complex equipment and harsh reaction conditions, and the operation is simple and easy to control.
4. The agent has high purity and low impurity content. Compared with other products on the market, it has low dosage and low sludge volume.

Related Search

Magnesium Hydroxide Flame Retardant CAS 1309-42-8

Polyacrylamide(PMA) CAS 9003-05-8