Home
About Us
Products
Knowledge
Blog
Contact Us
SGA is divided into two major categories: primer-type and dual-active-component-type.
2026-07-17
Silicone resins consist of a three-dimensional structure with a silicon-oxygen bond as the main chain; at high temperatures
2026-07-15
Silicone adhesives are adhesives prepared using polyorganosiloxanes and their modified forms as the primary raw materials
2026-07-13
Butyl sealant refers to a sealant made primarily from isobutylene-based polymers; it is one of the most widely used types of sealant in the world.
2026-07-07
Polysulfide sealant is made from liquid polysulfide rubber with mercaptan-terminated chains as the base material, combined with curing agents, additives, and fillers.
2026-07-06
Phenolic resin adhesives are classified into phenolic resin adhesives and modified phenolic resin adhesives.
2026-07-03
Anaerobic adhesives, commonly referred to as anaerobic glues, do not cure when exposed to oxygen or air.
2026-07-02
The basic formulation of α-cyanoacrylate adhesives consists of α-cyanoacrylate monomers, polymerization inhibitors, thickeners, plasticizers, curing accelerators, and other components.
2026-07-01
Adhesives whose main components are polymers containing multiple carbamate groups on their molecular backbone or oligomers containing isocyanate groups are referred to as polyurethane adhesives.
2026-06-30
2026-06-29
Adhesives primarily composed of polymers (polyurethane, PU) or oligomers containing isocyanate groups as their main components are referred to as polyurethane adhesives.
2026-06-26
Epoxy structural adhesives generally require the use of rubber or thermoplastic resins for toughening.
2026-06-25
