Home
About Us
Products
Knowledge
Blog
Contact Us
Poly(allylamine hydrochloride) is a water-soluble polymer with CAS 71550-12-4. In its solid state
2026-07-28
Chlorinated polyethylene, abbreviated as CPE or CM, is a saturated polymer material
2026-07-27
Melamine resin adhesive is a colourless aqueous solution of formaldehyde resin.
2026-07-24
Magnesium carbonate is an inorganic compound.
2026-07-23
What is the difference between petroleum and petrolatum?
2026-07-22
Cetostearyl alcohol (CAS 67762-27-0) is a mixture of hexadecyl alcohol (C₁₆H₃₄O) and octadecyl alcohol (C₁₈H₃₈O).
2026-07-21
SGA is divided into two major categories: primer-type and dual-active-component-type.
2026-07-17
Silicone resins consist of a three-dimensional structure with a silicon-oxygen bond as the main chain; at high temperatures
2026-07-15
Silicone adhesives are adhesives prepared using polyorganosiloxanes and their modified forms as the primary raw materials
2026-07-13
Butyl sealant refers to a sealant made primarily from isobutylene-based polymers; it is one of the most widely used types of sealant in the world.
2026-07-07
Polysulfide sealant is made from liquid polysulfide rubber with mercaptan-terminated chains as the base material, combined with curing agents, additives, and fillers.
2026-07-06
Phenolic resin adhesives are classified into phenolic resin adhesives and modified phenolic resin adhesives.
2026-07-03
